Changzhou shidai jinhua clutch co., LTD. : how to deal with the pedal failure of the clutch (Ii)
2019-03-12
3, if the above adjustment is normal, is still not completely separated, it is necessary to remove the clutch, check whether the driven plate is installed in reverse, axial movement is difficult, whether the master and slave plate warp, separation lever screw is loose, floating pin is off.
4, for the new riveted friction plate clutch, to check whether the driven plate and friction plate is too thick. If it is too thick, add a gasket between the clutch cover and the flywheel.
5, for the hydraulic clutch, in addition to the above inspection, should also check whether there is a lack of brake fluid, whether the pipeline leakage out of the hydraulic system air.
This article is arranged by changzhou shidai jinhua clutch co. LTD
?
